Naim UNITIQUTE Specifications download pdf (Page 4)

UnitiQute Installation and Connection

2.2 Mains Power Connection

Connect UnitiQute to a mains power socket using either

the mains cable supplied or a Naim Power-Line.

2.3 FM/DAB Aerial Connection

In order to enable high quality FM and DAB radio,

UnitiQute requires a, strong, interference-free radio signal.

Its rear panel FM/DAB Aerial socket must be connected,

via 75 Ohm low-loss coaxial cable, to a suitable aerial. The

aerial should be mounted clear of large obstructions and

as high as possible; ideally on a roof.

Note: Your local retailer should be able to offer advice on

a suitable aerial and aerial installer.

2.4 Audio Signal Connections

2.4.1 Audio Signal Inputs

UnitiQute provides one USB input socket, two stereo

analogue inputs and five S/PDIF digital inputs including

one combined analogue/digital input socket. Connection

to the inputs is made via a variety of socket types. The

following table lists the inputs and their socket type:

Input Type Socket

rear panel Analogue RCA phonos

front panel Analogue 3.5mm jack

Digital 3.5mm mini-TosLink jack

dig. 1 Digital Coaxial (RCA phono)

dig. 2 Digital Optical (TosLink)

dig. 3 Digital Coaxial (RCA phono)

dig. 4 Digital Optical (TosLink)

USB Digital USB Type A

Note: The front panel analogue/digital jack socket can

accept both conventional analogue 3.5mm plugs and

mini-TosLink optical digital plugs. It will automatically

identify the type of plug inserted and handle the signal

appropriately.

Always use high quality interconnect cables to connect

sources to UnitiQute inputs.

2 UnitiQute Installation and Connection

UnitiQute should be installed on an equipment stand intended for the purpose. Do not

stand it directly on top of another item of equipment and ensure it is well ventilated. Care

should be taken to ensure that it is level. It should be installed in its final location before

connecting cables or switching on. UnitiQute has no standby mode and is intended to be

left switched on.

Connecting UnitiQute to mains power and to a variety of audio peripherals and sources

is described in the following paragraphs. Diagram 2.1 illustrates the UnitiQute rear panel

connection sockets.

2.1 UnitiQute Rear Panel

mains input

and fuse

power

switch

signal

ground

switch

preamp

output

network

socket

RS232

socket

left

speaker

right

speaker

digital

output

analogue

input

digital inputs

1 & 3 (coaxial)

digital

inputs 2 & 4

(optical)

DAB/FM

aerial

socket

wireless network (Wi-

Fi) antenna socket

1 2 3 4 5 6 7 8 9 ... 22 23

Comments to this Manuals

No comments

Naim UNITIQUTE Specifications Page 4

Comments to this Manuals

Related products and manuals for Digital media players Naim UNITIQUTE